When building a home or investment property through a licensed builder, you are heavily reliant on the building supervisor in regards to build quality and compliance. It is the role of the building supervisor to ensure that your home or investment property is being constructed accurately as per your plans and specifications, as well as to monitor the standard of work being conducted by the labourers. The building supervisor must make certain that the correct materials are being used and building quality / compliance is being achieved throughout the construction process as per the relevant codes and Australian standards.
The construction process is a complicated one with many moving parts and there are many opportunities for mistakes to occur undetected, and unfortunately with many building companies the building supervisors are often unlicensed and are given too many homes to supervise adequately, thus quality is often compromised. Many of the larger building companies will not even assign a site supervisor to a home until it is at the framing stage, thus the entire footings construction is left in the hands of the footing contractors. Though engineering companies who design the footings state in their agreements with the builders that they must first inspect the trenches and trench fit-out prior to the concrete pour, in my experience this often does not occur and many major defects can and do go undetected, leaving a jeopardised footing system that will potentially fail in the future.
By utilising SBI progress inspections at critical stages of the building process, you are not only gaining an objective expert opinion that will increase your chance of achieving quality, but you are also keeping the builder in check by ensuring that the home / investment property is being built accurately and compliantly according to the plans, specifications, engineering, council requirements, and the relevant Building Codes and Australian Standards.
Our expert inspector will conduct thorough staged progress inspections of your property to ensure that quality is being achieved and to make certain that the dwelling is being constructed in accordance with the NCC / BCA and the relevant Australian Standards / manufacturers specifications. SBI will provide you same-day with a comprehensive written report replete with coloured images via e-mail capturing all of the major and minor defects observed. Our expert inspector will also contact you by phone following the completion of the inspection to discuss the findings and provide you with specific advice, or if you would prefer, will meet you onsite for a face-to-face chat post-inspection.
Progress building inspections should take place at the following construction stages:
- Site preparation and footings
- Wall and roof framing
- Roof covering and external cladding (brickwork masonry etc.)
- Internal linings / waterproofing
- 2nd fix carpentry
- Pre-handover prior to practical completion
Don’t forget to check out our building inspections services at www.summertonbuildinginspections.com.au
Also follow us on Google + : Read more about Staged Progress Inspections here.